Description
BESTfit 2.25 Inch ID Heavy Duty Silicone Coolant Hose
Need to replace coolant hoses? 4 State Trucks carries 2.25 inch inner diameter heavy duty silicone coolant hoses with 3-ply polyester reinforcement. These hoses are designed to withstand hostile engine environments for heavy duty pressure connections, for coolant applications only with a temperature range of -65 to 350 degrees Fahrenheit and burst pressures. These hoses resist hardening, cracking, cold leaks, aging, many chemicals and are ideal for extreme temperature and various pressure ranges where high performance levels are required.
This hose is sold per an inch, order the inches you need for your project up to 36 inches.
* High Quality Coolant Hose* Made Of Silicone
* 2.25 Inch ID - 57MM
* 2.57 Inch OD - 65MM
* Burst Pressures
- Actual 225 PSI
- SAEJ20R1 175 PSI
- TMC 100 PSI
* With 3 Plies Of Polyester Reinforcement
* Meets Or Exceeds The Operating Requirement Of SAE Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B
* Class 1 Grade II
* Temperature Range -65 Degree To 350 Degee F
* This Hose Is Sold Per Inch
* The Maximum Length Available In One Piece is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
* Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
* Warranty On Coolant Hoses Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
BESTfit 2.50 Inch ID Heavy Duty Silicone Coolant Hose
In the market for replacement coolant hoses? 4 State Trucks carries 2.50 inch ID heavy duty silicone coolant hoses with 3-ply polyester reinforcement. These hoses are designed to withstand hostile engine environments for heavy duty pressure connections, for coolant applications only with a temperature range of -65 to 350 degrees Fahrenheit, actual 200 PSI and burst pressures. These hoses resist hardening, cracking, cold leaks, aging, many chemicals and are ideal for extreme temperature and various pressure ranges where high performance levels are required.
This hose is sold per an inch, order the inches you need for your project.
* High Quality Coolant Hose* Made Of Silicone
* 2.50 Inch ID- 64MM
* 2.82 Inch OD - 72MM
* With 3 Plies Of Polyester Reinforcement
* For Coolant Applications Only
* Meets Or Exceeds The Operating Requirement Of SAE Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B Class 1 Grade II
* Temperature Range -65 Degree To 350 Degee F
* Burst Pressures
- Actual 200 PSI
- SAEJ20R1 150 PSI
- TMC 100 PSI
* This Hose Is Sold Per Inch
* The Maximum Length Available In One Piece is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
* Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
* Warranty On Coolant Hoses Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
BESTfit 2.75 Inch ID Heavy Duty Silicone Coolant Hose
* High Quality Coolant Hose* Made Of Silicone
* 2.75 Inch ID - 70MM
* 3.07 Inch OD - 78MM
* With 3 Plies Of Polyester Reinforcement
* For Coolant Applications Only
* Meets Or Exceeds The Operating Requirement Of SAE Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B Class 1 Grade II
* Temperature Range -65 Degree To 350 Degee F
* Burst Pressures
- Actual 200 PSI
- SAEJ20R1 125 PSI
- TMC 100 PSI
* This Hose Is Sold Per Inch
* The Maximum Length Available in One Piece Is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
* Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
* Warranty On Coolant Hoses Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
BESTfit 3.00 Inch ID Heavy Duty Silicone Coolant Hose
Do you need coolant hoses to withstand all of the elements your truck goes through? 4 State Trucks carries 3 inch ID x 3.32 inch OD heavy duty silicone coolant hoses with 3-ply polyester reinforcement. These hoses are designed to withstand hostile engine environments for heavy duty pressure connections, for coolant applications only with a temperature range of -65 to 350 degrees Fahrenheit, actual 200 PSI and burst pressures. These hoses resist hardening, cracking, cold leaks, aging, many chemicals and are ideal for extreme temperature and various pressure ranges where high performance levels are required.
This hose is sold per an inch, order the inches you need for your project.
* High Quality Coolant Hose* Made Of Silicone
* 3.00 Inch ID - 76MM
* 3.32 Inch OD - 84MM
* With 3 Plies Of Polyester Reinforcement
* For Coolant Applications Only
* Meets Or Exceeds The Operating Requirement Of SAE Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B Class 1 Grade II
* Temperature Range -65 Degree To 350 Degee F
* Burst Pressures
- Actual 200 PSI
- SAEJ20R1 100 PSI
- TMC 100 PSI
* This Hose Is Sold Per Inch
* The Maximum Length Available in One Piece Is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
* Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
* Warranty On Coolant Hoses Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
BESTfit 2.00 Inch ID Heavy Duty Silicone Coolant Hose
Are you in the market for 2 inch coolant hoses? 4 State Trucks carries 2 inch ID x 2.32 inch OD heavy duty silicone coolant hoses with 3-ply polyester reinforcement. These hoses are designed to withstand hostile engine environments for heavy duty pressure connections, for coolant applications only with a temperature range of -65 to 350 degrees Fahrenheit, actual 200 PSI and burst pressures. These hoses resist hardening, cracking, cold leaks, aging, many chemicals and are ideal for extreme temperature and various pressure ranges where high performance levels are required. The design for these hoses makes them a durable, long-lasting solution for your applications.
This hose is sold per an inch, order the inches you need for your project.
* High Quality Coolant Hose* Made Of Silicone
* 2.00 Inch ID- 51MM
* 2.32 Inch OD - 59MM
* With 3 Plies Of Polyester Reinforcement
* For Coolant Applications Only
* Meets Or Exceeds The Operating Requirement Of SAE Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B
* Class 1 Grade II
* Temperature Range -65 Degree To 350 Degee F
* Burst Pressures
?- Actual 250 PSI
?- SAEJ20R1 200 PSI
?- TMC 100 PSI
* This Hose Is Sold Per Inch
* The Maximum Length Available in One Piece Is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
* Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
* Warranty On Coolant Hoses Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
BESTfit 1.00 Inch ID Heavy Duty Silicone Coolant Hose
Do you have a need for 1 inch ID coolant hoses? 4 State Trucks carries heavy duty silicone coolant hoses with 3-ply polyester reinforcement. These hoses are designed to withstand hostile engine environments for heavy duty pressure connections, for coolant applications only with a temperature range of -65 to 350 degrees Fahrenheit, actual 450 PSI and burst pressures.
This hose is sold per an inch, order the inches you need for your project.
* High Quality Coolant Hose* Made Of Silicone
* 1.00 Inch ID - 25MM
* 1.32 Inch OD - 34MM
* With 3 Plies Of Polyester Reinforcement
* For Coolant Applications Only
* Meets Or Exceeds The Operating Requirement Of SAE Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B Class 1 Grade II
* Temperature Range -65 Degree To 350 Degee F
* Burst Pressures
- Actual 450 PSI
- SAEJ20R1 300 PSI
- TMC 125 PSI
* This Hose Is Sold Per Inch
* The Maximum Length Available in One Piece Is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
* Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
* Warranty On Coolant Hoses Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
BESTfit 1.25 Inch ID Heavy Duty Silicone Coolant Hose
Are you in the market for 1.25 inch ID coolant hoses? 4 State Trucks carries heavy duty silicone coolant hoses with 3-ply polyester reinforcement. These hoses are designed to withstand hostile engine environments for heavy duty pressure connections, for coolant applications only with a temperature range of -65 to 350 degrees Fahrenheit, actual 425 PSI and burst pressures.
These hoses resist hardening, cracking, cold leaks, aging, many chemicals and are ideal for extreme temperature and various pressure ranges where high performance levels are required. coolant hoses meet or exceed the operating requirement of SAE Class A and TMC RP303B Class 1 Grade II. The design for these hoses makes them a durable, long-lasting solution for your applications.
This hose is sold per an inch, order the inches you need for your project.
* High Quality Coolant Hose* Made Of Silicone
* 1.25 Inch ID - 32MM
* 1.57 Inch OD - 40MM
* With 3 Plies Of Polyester Reinforcement
* For Coolant Applications Only
* Meets Or Exceeds The Operating Requirement Of SAE Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B Class 1 Grade II
* Temperature Range -65 Degree To 350 Degee F
* Burst Pressures
- Actual 425 PSI
- SAEJ20R1 275 PSI
- TMC 125 PSI
* This Hose Is Sold Per Inch
* The Maximum Length Available in One Piece Is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
* Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
* Warranty On Coolant Hoses Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
BESTfit 1.50 Inch ID Heavy Duty Silicone Coolant Hose
Do you need a 1.50 inch coolant hose? 4 State Trucks carries 1.50 inch ID heavy duty silicone coolant hoses with 3-ply polyester reinforcement. These hoses are designed to withstand hostile engine environments for heavy duty pressure connections, for coolant applications only with a temperature range of -65 to 350 degrees Fahrenheit, actual 375 PSI and burst pressures.
These hoses resist hardening, cracking, cold leaks, aging, many chemicals and are ideal for extreme temperature and various pressure ranges where high performance levels are required. coolant hoses meet or exceed the operating requirement of SAE Class A and TMC RP303B Class 1 Grade II. The design for these hoses makes them a durable, long-lasting solution for your applications.
This hose is sold per an inch, order the inches you need for your project.
* High Quality Coolant Hose* Made Of Silicone
* 1.50 Inch ID - 38MM
* 1.82 Inch OD - 46MM
* With 3 Plies Of Polyester Reinforcement
* For Coolant Applications Only
* Meets Or Exceeds The Operating Requirement Of SAE Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B Class 1 Grade II
* Temperature Range -65 Degree To 350 Degree F
* Burst Pressures
- Actual 375 PSI
- SAEJ20R1 250 PSI
- TMC 125 PSI
* This Hose Is Sold Per Inch
* The Maximum Length Available in One Piece Is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
* Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
* Warranty On Coolant Hoses Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
BESTfit 1.75 Inch ID Heavy Duty Silicone Coolant Hose
Are you in the market for 1.75 inch OD coolant hoses? 4 State Trucks offers heavy duty silicone coolant hoses with 3-ply polyester reinforcement. These hoses are designed to withstand hostile engine environments for heavy duty pressure connections, for coolant applications only with a temperature range of -65 to 350 degrees Fahrenheit, actual 300 PSI and burst pressures.
These hoses resist hardening, cracking, cold leaks, aging, many chemicals and are ideal for extreme temperature and various pressure ranges where high performance levels are required. coolant hoses meet or exceed the operating requirement of SAE Class A and TMC RP303B Class 1 Grade II. The design for these hoses makes them a durable, long-lasting solution for your applications.
This hose is sold per an inch, order the inches you need for your project.
* High Quality Coolant Hose* Made Of Silicone
* 1.75 Inch ID- 44MM
* 2.07 Inch OD - 53MM
* With 3 Plies Of Polyester Reinforcement
* For Coolant Applications Only
* Meets Or Exceeds The Operating Requirement Of SAE Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B
* Class 1 Grade II
* Temperature Range -65 Degree To 350 Degee F
* Burst Pressures
?- Actual 300 PSI
?- SAEJ20R1 225 PSI
?- TMC 125 PSI
* This Hose Is Sold Per Inch
* The Maximum Length Available in One Piece Is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
* Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
* Warranty On Coolant Hoses Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
BESTfit 3.25 Inch ID Heavy Duty Silicone Coolant Hose
* High Quality Coolant Hose* Made Of Silicone
* 3.25 Inch ID - 83MM
* 3.57 Inch OD - 91MM
* With 3 Plies Of Polyester Reinforcement
* For Coolant Applications Only
* Meets Or Exceeds The Operating Requirement Of SAE Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B Class 1 Grade II
* Temperature Range -65 Degree To 350 Degee F
* Burst Pressures
- Actual 175 PSI
- SAEJ20R1 75 PSI
- TMC 100 PSI
* This Hose Is Sold Per Inch
* The Maximum Length Available in One Piece Is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
* Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
* Warranty On Coolant Hoses Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
BESTfit 3.50 Inch ID Heavy Duty Silicone Coolant Hose
* High Quality Coolant Hose* Made Of Silicone
* 3.50 Inch ID - 89MM
* 3.82 Inch OD - 97MM
* With 3 Plies Of Polyester Reinforcement
* For Coolant Applications Only
* Meets Or Exceeds The Operating Requirement Of SAE Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B Class 1 Grade II
* Temperature Range -65 Degree To 350 Degee F
* Burst Pressures
- Actual 150 PSI
- SAEJ20R1 75 PSI
- TMC 100 PSI
* This Hose Is Sold Per Inch
* The Maximum Length Available in One Piece Is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
* Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
* Warranty On Coolant Hoses Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
BESTfit 3.75 Inch ID Heavy Duty Silicone Coolant Hose
* High Quality Coolant Hose* Made Of Silicone
* 3.75 Inch ID - 95MM
* 4.07 Inch OD - 103MM
* With 3 Plies Of Polyester Reinforcement
* For Coolant Applications Only
* Meets Or Exceeds The Operating Requirement Of SAE Class A
* Meets Or Exceeds The Operating Requirements Of TMC RP303B Class 1 Grade II
* Temperature Range -65 Degree To 350 Degee F
* Burst Pressures
- Actual 135 PSI
- SAEJ20R1 50 PSI
- TMC 100 PSI
* This Hose Is Sold Per Inch
* The Maximum Length Available in One Piece Is 36 Inches (3 Feet). If Order Quantity Is Above 36 Inches, You Will Receive Multiple Pieces. If You Need More Than 36 Inches As 1 Piece, Please Contact Our Sales Staff for a Special Order.
* Please Make Sure Measurements Are Correct Before Ordering, Cut Pieces Of Hose Are Not Returnable.
* Warranty On Coolant Hoses Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
* This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.
Additional Information
Truck Class: |
Heavy Duty |
Make: |
Universal Items |
Product Type: |
Engine Parts |
1 Review
-
Heavy Duty Silicone Coolant Hose
Nice hose. What they don't tell you is 36" lengths.