Front Axle Air Ride Kit Fits Peterbilt 567

* High Quality Axle Air Ride Kit
* Front Air Ride Add In Kits Assist With:
 - Maintain Proper Ride Height,
 - Increase Vehicle Stability
 - Improve Handling And Steering
 - Reduce Leaf Spring Wear And Drive Train Maintenance
 - Maintain Correct Steering Geometry
 - Improve Ride Quality In Both Conventional And Cabover Trucks
 - Adjustable To Varying Load Requirements Or Road Conditions With The Help Of Convenient In-Cab Controls
* Controls To Be Installed In A Provided Weather Proof Enclosure

Air Kit Includes:
  - 2 Angle Bracket
  - 2 Top Plate
  - 2 Double Convolute Air Spring
  - 2 Bottom Mounting 4 Inch
  - 6 Hex Head Cap Screw 1/2 Inch X 2 Inch Long
  - 4 Hex Head Cap Screw 1/2 Inch X 1 Inch Long
  - 16 Washer
  - 6 Lock nut
  - 4 Allen Head Screw 3/8 Inch X 1 Inch Long
  - 4 Washer 3/8 Inch
  - 4 Hex Head Cap Screw 3/8 Inch X 1 Inch Long
* Sold As A Kit
* Warranty On Axle Air Ride Kit Against Defects In Workmanship & Material From Date Of Purchase

*** High Quality Aftermarket Replacement Part (Not OEM)***

* This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.

** Warning: Do not inflate assembly when it is unrestricted. Assembly must be restricted by suspension or other adequate structure. Do not inflate beyond 100 PSI. Improper use or over-inflation may cause assembly to burst, causing property damage and/or severe personal injury.
With a load on your truck and the air springs inflated, you must have at least one inch clearance all around the air bellows. FOR BEST RIDE use only enough air pressure in the air springs to level the vehicle when viewed from the side. Inflate the air springs to maintain this height under any conditions of load. Too much air pressure in the air springs will result in a stiffer ride. Too little air pressure will allow the vehicle to bottom out and not provide the improvement in handling that is possible. To prevent possible damage, always maintain a minimum of 2 PSI in the Load-Share bellows.