Description
Steer Axle Air Ride Kit W/O Need For Shock Brackets
The Loadshare System Comes Complete With Air Bellows, Mounting Hardware, Brackets, Pressure Control System And Installation Instructions. The Air Bellows Are Designed To Fit In The Open Space Between The Axle Centerline, Spring Package And The Bottom Of The Vehicle Frame.
* High Quality Steer Axle Air Ride Kit* Kit Includes
- (2) Angle Brackets
- (2) Top Plates
- (2) Double Convolute Air Springs
- (2) Single Convolute Air Springs
- (2) Bottom Mounting Plate 4 Inch
- (6) Hex Head Cap Screws - 1/2 Inch UNC By 2 Inches Long
- (4) Hex Head Cap Screws - 1/2 Inch UNC By 1 Inch Long
- (16) 1/2 Inch Washers
- (6) Locknuts - 1/2 Inch UNC
- (4) Allen Head Screws 3/8 Inch UNC By 1 Inch Long
- (4) 3/8 Inch Washers
- (4) Hex Head Cap Screws 3/8 Inch UNC By 1 Inch Long
* Fits Models with Round U-Bolts Only
* Sold As Kit
* Warranty On Front Axle Air Ride Kits Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
** Warning: Do not inflate assembly when it is unrestricted. Assembly must be restricted by suspension or other adequate structure. Do not inflate beyond 100 PSI. Improper use or over-inflation may cause assembly to burst, causing property damage and/or severe personal injury.
With a load on your truck and the air springs inflated, you must have at least one inch clearance all around the air bellows. FOR BEST RIDE use only enough air pressure in the air springs to level the vehicle when viewed from the side. Inflate the air springs to maintain this height under any conditions of load. Too much air pressure in the air springs will result in a stiffer ride. Too little air pressure will allow the vehicle to bottom out and not provide the improvement in handling that is possible. To prevent possible damage, always maintain a minimum of 2 PSI in the Load-Share bellows.
Fitment
* Fits Ford F750 1999 thru Current
* Fits Freightliner FL70 1996 thru 2005
* Fits Freightliner FL80 1996 thru 2005
* Fits Kenworth T2000 1999 thru 2010
* Fits Kenworth T300 1997 thru 2008
* Fits Kenworth T680 2013 thru 2021
* Fits Kenworth T800 1997 thru Current
* Fits Kenworth T800 Curved Glass 1997 thru Current
* Fits Kenworth T880 2014 thru Current
* Fits Kenworth W900B 1995 thru Current
* Fits Kenworth W900B Aerocab 1995 thru Current
* Fits Kenworth W900L 1995 thru Current
* Fits Kenworth W900L Aerocab 1995 thru Current
* Fits Sterling Acterra 5500 2004 thru 2009
* Fits Sterling Acterra 6500 2004 thru 2009
* Fits Sterling Acterra 7500 2004 thru 2009
* Fits Sterling Acterra 8500 2004 thru 2009
* Fits Sterling A8513 1999 thru 2009
* Fits Sterling A8522 1999 thru 2009
* Fits Sterling A9513 1999 thru 2009
* Fits Sterling A9522 1999 thru 2009
* Fits Sterling AT8513 1999 thru 2009
* Fits Sterling AT8522 1999 thru 2009
* Fits Sterling AT9513 1999 thru 2009
* Fits Sterling AT9522 1999 thru 2009
* Fits Sterling L7501 1999 thru 2007
** 101 BBC Round HEADLIGHT
* Fits Sterling L7501 2000 thru 2009
** 101 BBC Square HEADLIGHT
* Fits Sterling L8501 1999 thru 2009 101BBC
* Fits Sterling L8513 1999 thru 2009 113BBC
* Fits Sterling L8522 1999 thru 2009 122BBC
* Fits Sterling L9501 1999 thru 2009 101BBC
* Fits Sterling L9513 1999 thru 2009 113BBC
* Fits Sterling L9522 1999 thru 2009 122BBC
* Fits Sterling LT7501 1999 thru 2009 101BBC
* Fits Sterling LT8501 1999 thru 2009 101BBC
* Fits Sterling LT8513 1999 thru 2009 113BBC
* Fits Sterling LT8522 1999 thru 2009 122BBC
* Fits Sterling LT9501 1999 thru 2009 101BBC
* Fits Sterling LT9513 1999 thru 2009 113BBC
* Fits Sterling LT9522 1999 thru 2009 122BBC
** Fits Models With Round U-Bolts Only
Additional Information
Truck Class: |
Heavy Duty |
Make: |
Freightliner |
Make: |
Ford |
Make: |
Kenworth |
Make: |
Sterling |
Product Type: |
Frame & Chassis |
5 Reviews
-
Front Axle Air Ride Kit For Round U-Bolts
Installed on a 1993 FLD 120. Had to modify the top frame bracket. Shaved off about ¼ inch on side slant to clear room for existing air hose mount for brakes. Drilled 3 holes in frame. Pretty straight forward. Truck now rides about 6 inches higher in the front. No more bottoming out the front end every time you hit a pot hole. Truck also leaned a little to the passenger side before installing. Now it sits very level. It was a pretty penny to bite off. Definitely worth it though.
-
Front Axle Air Ride Kit Fits Round U-Bolts
Good quality product. I had to make some alterations to the top mounting bracket. Other than that, no leaks or issues. The truck rides great now.
-
Front Axle Air Ride Kit Fits Round U-Bolts
Best upgrade to date. Highly recommend
-
Front Axle Air Ride Kit Fits Round U-Bolts
Great product installation was fast and easy , the benefit is worth the expense. I run heavy haul rgn it makes the steer axle so smooth when you hit a bridge joint you don't feel the shock.
-
Front Axle Air Ride Kit Fits Round U-Bolts
Good product improves the ride can be installed if you have a little mechanical experience took me 2.5 hours to install in my shop