Description
This high quality 18 inch chrome-plated steel open end bumper that fits Kenworth T800 and T880 models has a 7 inch break back and has options for tow, fog light, step, and vent hole cutouts. The bumper is made in the USA and comes with a 1 year warranty.
Fitment
* Fits Kenworth T800 2004 thru 2024
** Fits Kenworth T800 Curved Glass 2004 thru 2024
* Fits Kenworth T880 2014 thru 2024
Valley Chrome Bumper With Single Break Back Design and Pre-Cut Holes For Center Tow
* High Quality Bumper* Chrome-Plated Steel
* 18 Inch
* Has Cutouts For:
- Center Tow Holes
* Single Break Back Design
* Made In USA
* Sold Individually
* Warranty On Bumpers Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
* This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.
* Please Verify Mounting Hole Pattern, Some Year Models Can Have Multiple Offerings.
Valley Chrome Single Break Back Bumper W/ Pre-Cut Bolt Holes
* High Quality Bumper* Chrome-Plated Steel
* 18 Inch
* Has Cutouts For:
- Center Tow Holes
- Vent Hole
* Bolt Holes
* Single Break Back Design
* Made In USA
* Sold Individually
* Warranty On Bumpers Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM)***
* This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.
* Please Verify Mounting Hole Pattern, Some Year Models Can Have Multiple Offerings.
Open End Style Bumper Fits Kenworth T-800 & T-880
This high quality 18 inch chrome-plated steel open end bumper that fits Kenworth T800 and T880 models has a 7 inch break back and has options for tow, fog light, step, and vent hole cutouts. The bumper is made in the USA and comes with a 1 year warranty.
* High Quality Replacement Bumper* Made Of 10-Gauge Chrome-Plated Steel
* 18 Inch Height
* 7 Inch Break Back
* Open End Break Back Style
* Straight Ends - Does Not Taper Up
* Center Vent And Tow Pin Holes
* Sold Individually
* Made In USA
* Warranty On Bumpers Against Defects In Workmanship & Material From Date Of Purchase
***High Quality Aftermarket Replacement Part (Not OEM)***
*** Attention: Does Not Have Cutout For Radar Sensor ***
Valley Chrome Bumper 18 Inch W/ Step And Tow Pin Holes Fits Kenworth T800 & T880
If you are in the market for a new or replacement bumper, look no further than this 10-gauge (1/8 inch thick) chrome-plated steel bumper from Valley Chrome Plating here at 4 State Trucks. This 18 Inch bumper features cutouts for bolt holes, step hole, and tow/hitch holes. For 60 years, Valley Chrome has built a reputation for quality, exceptional service and competitive pricing and extends a warranty of one year against defects in materials and workmanship.
* High Quality Replacement Bumper* Made Of 10-Gauge (1/8 Inch Thick) Chrome-Plated Steel
* 18 Inch Height
* Has Cutouts For
- Mounting Holes
- Step Hole
- Tow/Hitch Holes
* Open End Bumper
* Does Not Include Mounting Bolts, Washers Or Hardware - Sold Separately
* Made In USA
* Sold Individually
* Warranty on Bumper Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
* Please Verify Mounting Hole Pattern, Some Year Models Can Have Multiple Offerings.
Open End Style Bumper Fits Kenworth T-800 & T-880
If you're in the market for a new or replacement bumper, look no further than this 10-gauge (1/8 inch thick) chrome-plated steel bumper from Valley Chrome Plating here at 4 State Trucks. This 18 Inch bumper features cutouts for bolt holes, step hole, tow/hitch holes, and vent holes. For 60 years, Valley Chrome has built a reputation for quality, exceptional service and competitive pricing and extends a warranty of one year against defects in materials and workmanship.
* High Quality Replacement Bumper* Made Of 10-Gauge (1/8 Inch Thick) Chrome-Plated Steel
* Has Cutouts For
- Mounting Holes
- Step Hole
- Tow/Hitch Holes
- Vent Holes
* 18 Inch Open End Bumper
* Does Not Include Mounting Bolts, Washers Or Hardware - Sold Separately
* Made In USA
* Sold Individually
* Warranty on Bumper Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
* Please Verify Mounting Hole Pattern, Some Year Models Can Have Multiple Offerings.
* This Item Is Special Order. This Item Will Not Be Able To Be Canceled And Is Non-Returnable.
Valley Chrome Open End Style Bumper Fits Kenworth T-800 & T-880
If you are in the market for a new or replacement bumper, look no further than this 10-gauge (1/8 inch thick) chrome-plated steel bumper from Valley Chrome Plating here at 4 State Trucks. This 18 Inch bumper features cutouts for bolt holes, 2 square fog light holes, step hole, tow/hitch holes, and vent holes. For 60 years, Valley Chrome has built a reputation for quality, exceptional service and competitive pricing and extends a warranty of one year against defects in materials and workmanship.
* High Quality Replacement Bumper* Made Of 10-Gauge (1/8 Inch Thick) Chrome-Plated Steel
* 18 Inch Open End Bumper
* Has Cutouts For
- Mounting Holes
- 2 Square Fog Light Holes
- Step Hole
- Tow/Hitch Holes
- Vent Holes
* Does Not Include Mounting Bolts, Washers Or Hardware - Sold Separately
* Made In USA
* Sold Individually
* Warranty On Replacement Bumpers Against Defects In Workmanship & Material From Date Of Purchase
*** High Quality Aftermarket Replacement Part (Not OEM) ***
* Please Verify Mounting Hole Pattern, Some Year Models Can Have Multiple Offerings.
Additional Information
Height Options: |
18 Inch |
Location: |
Made In USA |
Light Options: |
Without Lights |
Truck Class: |
Heavy Duty |
Style Options: |
Single Break Back |
Material Options: |
Steel |
Make: |
Kenworth |
Finish Options: |
Chrome-Plated |
Type Options: |
Standard Mount |
Size Options: |
10 Gauge |
Product Type: |
Bumpers |
Style Options: |
Open End |
Material Options: |
Stainless Steel |
